Upgrade from the Leetro MPC6515 controller to Ruida RDC6445S

These are raw notes.

Things that I need to know:

Homing / Reset Origin TopRight - is where there are limit switches

Work Area Size (eg 700x500mm) 1200 x 900 mm

Ultimate Air Assist Yes / No I don't know

Automatic Z Axis (Controlled …

For some reason my personal Pelican site won't properly serve localhost:8080

Chrome treats it as a file and downloads it. localhost:8080/index.html works fine.

I hit my head on the wall for a hot minute before I remembered telnet.

telnet localhost 8080
get / HTTP/1.1

And …

How to engrave a picture onto a glass bottle

Speed: Power:

Speed: Power:

Speed: Power:

Engrave: speed 300 power 40 Cut: speed 20 power 85, 3 times.

is helpful.

The laser originally LaserCut 5.3 and a plugin to Corel Draw.

It had the Leetro MPC6515 controller

Pictures from Aug 5, 2024

The full controller. Rotated to match the block diagram.

two Stepper drivers. Not sure where the third driver is.

Switches set the same. I rotated the image …

How to engrave a picture

On the way from the Lodge I told Finn "We don't want to go saying stupid things, like 'an Octopus in a Tuxedo."

"What's wrong with an Octopus in a Tuxedo?" he asked, quite reasonably.

I waited for a safe place to pull over, and …

Finn wanted a boat. Just five pieces, and he helpfully drew a picture of it.

I found a Laser cut Noah's Ark DXF and downloaded it.

Corel Draw loaded the plans as 'outlines,' at least, once I clicked 'convert outline to object' I got something I could work with.

My …

Finn and I started to play Splendor in my office, and I looked down on the book shelf and there was a picture of Molly's first day of Fourth Grade in 1997, With me, Molly, and a five month old Madeline.

We are in front of the barn on the …

Files: - projects/heart_words/live_laugh_fist.ecp - projects/heart_words/live_laugh_fist.dxf

Rose 1/4" Acrylic engrave speed 300 power 40 cut speed 8 power 90

I should do engraving tests. I think I had 500-40 at one point.

There were 'echoes' or ghost lines. About 8 mm to the right or lower …

Files:

black 3 mm Cell Cast Acrylic sheet, Chemcast engrave speed 300 power 40 cut speed 20 power 60 three passes

40 mm coin. Moose on one side. The number 4 or 6 on the other

It is fun how quickly you normalize improvements in your personal hedonic index.

Economists …

I had the front doors of the laser off, which might be a bad idea. In this photo you see the 'hatch' or top cover, and then two doors with key sockets on each side.

The two doors are actually one, but it is hinged in the middle so that …